© 2000-2022, ООО «InKomPro-Service» All rights reserved.
Our YouTube channelOFFICIAL PARTNERS OF THE COMPANY
Available for production of 3-layer and 1-layer plastic collapsible tubes
Technical specifications:
The plastic material is entering the 3-layer extruder through the feed hopper into the cylinder is captured by the extruder screw, heated, melted and squeezed out of the annular head in the form of a tubular sleeve being in a substance of a homogeneous viscous mass. The tubular sleeve leaving the annular slot of the extrusion head is collected, compressed and sent to the cooling bath, then fed through the connecting tube to the pulling device, and then to the cutting device, where the sleeve is cut into tube blanks of the required length.
Available volume, length and diameter of tubes.
Volume, |
|
Length, mm |
|
|
ml |
d 30 mm |
d 35 mm |
d 40 mm |
d 50 mm |
30 |
80 |
|
|
|
40 |
95 |
|
|
|
50 |
110 |
90 |
|
|
60 |
125 |
100 |
|
|
75 |
140 |
125 |
105 |
|
80 |
|
135 |
110 |
|
100 |
|
150 |
125 |
105 |
125 |
|
175 |
145 |
115 |
150 |
|
|
165 |
130 |
175 |
|
|
185 |
140 |
200 |
|
|
205 |
155 |
250 |
|
|
|
180 |
© 2000-2022, ООО «InKomPro-Service» All rights reserved.
Our YouTube channelAbout
Service maintenance
A team of experienced technical specialists allows us to provide high-quality services from the dismantling of equipment to the commissioning of lines. A team of engineers is ready to install and configure equipment at the customer's site.
3-layer Sunway extruder BJG-III
ID number:
Request price and info