Innovation / Commerce / Production +7 812 462 81 81 RU | EN

Used equipment for filling of plastic and laminate tubes

Norden high speed tubes filling line

ID Number: PTF 015

Year of production: 2010

Line for plastic and laminate tubes consists of:

  1. Tube filling and closing machine, produced by Norden, type Nordenmatic NM1702L-HA
  2. Folding box cartoner, produced by Norden, type Nordenpac 1702
  3. Case packer, produced by Pester, type TLC Pac Robot 2
  4. Loading station with conveyors and robot ABB

Tube filling and closing machine NM1702L-HA,

  • hot air sealing, 2 filling stations
  • output max. 170 tubes/min, for
  • tube diameter 10-50 mm
  • tube length 50-250 mm
  • dosing 1-300 ml
  • several change parts for tubes diameters 19/30 and 38 mm,
  • print mark control, Inkjet-printer Markem Imaje,
  • control Elau, lifting device for filling, tube hand-over to cartoner

Folding box cartoner Nordenpac 1702

  • output max. 140 boxes/min
  • GUK leaflet folder/inserter
  • Blind embossing, for tuck-in flap closure and hot melt closure, hot melt device Nordson
  • Inkjet-printer Markem Imaje

Belt checkweigher Garvens VS 40

  • Case packer PEWO-form TLC Pac Robot 2, Top Loading Concept, 2 robot axis, working area 360 x 1,000 mm,
  • speed/cycles/minute 50, load 25 kg, both side taper, control Elau, 2 carton formates 50 x 41 x 160 mm, 30 x 25 x 118 mm, carton material 350 g/m2
  • bypass, if runs without cartoner
  • Entire plant never ran in production
  • Electr. connection 230/400V/50Hz.