Used Gallus EM 280 Machine for printing on rolls of self-adhesive label

Machine for printing on rolls of self-adhesive labels for small and medium quantities.

Technical specifications of the machine:

• 8 colors
• Width of printing area: 280 mm
• Width of cutting area: 280 mm
• Width of paper: max 280 mm, min 140 mm
• Length of cutting area: min 8" (203,2 mm), max 18" (457,2 mm)
• Length off printing area: min 8" (203,2 mm), max 18" (457,2 mm)
• Output: max: 150 m per minute
• Drying: system of slotted-like nozzles with electronic regulation of temperature of warm air
• Winding of substrate, external diameter: max 670 mm
• Unwinding, external dimensions: max 1016 mm
• Unwinding, weight: max 180 kg
• Winding, external dimensions: max 720 mm
• Power supply (8 colors): 400 V, 50/60 Hz, 45 kW
• Possible equipment: up to 15 sections
• Standard equipment: 2 rotational cuttin sections, one of them with possibility of cutting from bottom
• Rakel: regulated negative rakel
• Side regulation on all printing and cutting secttions +-5 mm
• Longitudal regulation defined by distance, not limited regulation: 360 degrees
• Maximal noise level: 84 dB

Drying Unit GEW with VCP-1-33

• Power of transmitter: 160 W/cm
• Volume of consumed air: 320 m3/hour
• Heat dissipation on each cooling roller: 500 W
• Heat dissipation of PowerBrick case: 500 W

Drying unit IST

• Power of transmitter: 200 W/cm
• Volume of consumed air: 350 m3/hour
• Heat dissipation on each cooling roller: 2000 W
• Heat dissipation on control board: 1000 W
• All data related to a single unit of UV-dryer.

Hot Air Drying Unit

For a hot air drying device, the maximum volumetric flow rate is 2100 m3 / hour with one power supply and regardless of the number of drying devices.