Individual machines for the production of tinplate aerosol cans

Tinplate aerosol can manufacturing machines

Automatic machine for welding of canisters of aerosol cans

The equipment is used for the uninterrupted welding of canisters of aerosol cans

Machines for internal and external lacquering

Machines have units of control of applying powder and recirculation of powder. A special unit for applying powder is dosing its quantity precisely. It provides better protection of welding seam from corrosion.

Curing ovens of tinplate aerosol production line

Induction electric and gas curing ovens

Machines for necking, flanging and seaming aerosol can cone and bottom

Machines are used for formation of neck of aerosol can, seaming cones and bottoms of cans to main cylinder black of aerosol can, with automatic feeding of blanks and automatic extraction of produced aerosol can to a conveyor.

Automatic leakage tester

Vendor code: TAC 01-06

Diameter 45-65 mm
Height 80-320 mm
Productivity up to 220 pcs / min
Working heads 24
compressed air 2.5 m3 / min. 8 to 12 bar.
Power consumption 6 kVA

Automatic cutting machine PTGS-2

Vendor code: TAC 01-01

Cutting speed 80 m / min
Cutting speed 40 sheets. / min
Range (max) 1140 × 1140 mm
Range (min) 500 × 700 mm
Thickness (max) 0.4 mm.
Minimum horizontal width after cutting 150 mm
Minimum vertical width

Automatic cutting machine PTGS-1

Vendor code: TAC 01-012

Cutting speed 30 m / min
Cutting speed 30 sheets. / min
Range (max) 480 × 1200 mm
Thickness (max) 0,16-0,5 mm.
Minimum horizontal width after cutting 160 mm
Minimum vertical width after cutting 42mm
T

Our YouTube channel

About

Service maintenance

A team of experienced technical specialists allows us to provide high-quality services from the dismantling of equipment to the commissioning of lines. A team of engineers is ready to install and configure equipment at the customer's site.